Wireless N300 Home Router
20
ISP, otherwise select "Static". Consult your ISP if you are not clear.
7.
IP Address:
Enter the IP address provided by your ISP. Consult your ISP
if you are not clear.
8.
Subnet Mask:
Enter the subnet mask provided by your ISP.
9.
Gateway:
Enter the WAN Gateway provided by your ISP. Consult your
ISP if you are not clear.
Note:
1.
PPPOE, PPTP and L2TP cannot be used simultaneously!
2.
For PPTP and L2TP Internet connections, only Static IP or Dynamic
IP is available.
3.
Note that PPTP and L2TP may not be available on some products.
3.3 MAC Clone
This section allows you to configure d
evice’s WAN MAC address.
1.
MAC Address:
Config device’s WAN MAC address.
2.
Clone MAC Address:
Click to copy your PC's MAC address to the
device as a new WAN MAC address.
3.
Restore Default MAC:
Reset device’s WAN MAC to factory default.
3.4 WAN Speed
Here you can set the speed and duplex mode for WAN port. It is advisable to
keep the default
Auto
setting to get the best speed.
