Wireless N300 Home Router
.
59
6.5 Remote Web Management
The Remote management allows the device to be configured and
managed remotely from the Internet via a web browser.
1. Enable:
Check/uncheck to enable/disable the DMZ host feature.
2.
Port:
This is the management port to be open to outside access. The
default setting is 8080. DO NOT change it unless instructed by your
ISP.
3.
IP Address:
Here you can specify the IP Address Range for remote
management (When set to 0.0.0.0, the device becomes remotely
accessible to all the PCs on Internet or other external networks).
4.
OK:
Click to activate your settings.
Note:
1.
To access the device via port 8080, enter "http://x.x.x.x:8080" where
"x.x.x.x" represents the device's Internet IP address and 8080 is the
remote admin port. Assuming the device's Internet IP address is
220.135.211.56, then, simply replace the "x.x.x.x" with "220.135.211.56"
(namely, http://220.135.211.56:8080).
2.
Leaving the IP address field at "0.0.0.0" makes the device remotely
accessible to all the PCs on Internet or other external networks;
populating it with a specific IP address, say, 218.88.93.33, makes the
device only remotely accessible to the PC at the specified IP address.
6.6 Time
This page is used to set the router’s system time. You can choose to set
the time manually or get the GMT time from the Internet and the system
