Wireless N300 Home Router
.
54
access the Internet via the devices’ assigned IP addresses and service
port.
Forbid Only
: Only PCs listed as Forbidden will be forbidden from
accessing specified services; others are not restricted;
Permit Only
: Only PCs listed as permitted will be permitted to access
specified services; others will be forbidden.
Filter Mode:
Select Permit Only.
Access Policy:
Select an access policy number, say, 1, from the
drop-down list.
Policy Name:
Briefly describe the current rule, say, 80.
Start IP/End IP:
Enter the same IP address, say, 110, or 2 different IP
addresses, say, 110 and 120 in both boxes to specify a single PC or a
range of PCs for the current rule to apply to.
Port:
Specify TCP/UDP protocol port number (s), say, 80.
Type:
Select Both.
Time:
Specify a time period for a current rule to take effect. If the field is
set to 0:00-0:00, the rule will be applied 24hrs/day.
Day(s):
Specify a day or several days for a current rule to take effect.
Enable:
Check/uncheck to enable/disable the feature.
OK:
Click to activate your settings.
For example:
If you want to prohibit PCs within the IP address range of
192.168.0.100--192.168.0.120 from accessing Internet, do as follows:
