Wireless N300 Home Router
.
24
1.
Enable Manual DNS Assignment
: Check to activate DNS settings.
2.
Primary DNS Server
：
Enter the primary DNS address provided by
your IPS.
3.
Alternate DNS Server
：
Enter the other DNS address if your ISP
provides such addresses (optional).
4.
OK:
Click to save your settings.
Note:
1. Web pages are not able to open if DNS server addresses are entered
incorrectly.
2. Do remember to reboot the device to activate new settings when you
finish all settings.
1.7 DHCP Server
The Dynamic Host Configuration Protocol (DHCP) is an automatic
configuration protocol used on IP networks. If you enable the built-in
DHCP server on the device, it will automatically configure the TCP/IP
settings for all your LAN computers (including IP address, subnet mask,
gateway and DNS etc), eliminating the need of manual intervention. Just
be sure to set all computers on your LAN to be DHCP clients by selecting
"Obtain an IP Address Automatically" respectively on each such PC.
When turned on, these PCs will automatically load IP information from the
DHCP server. (This feature is enabled by default. DO NOT disable it
unless necessary).
1.8 DHCP Client List
DHCP Client List displays information of devices that have obtained IP
a
ddresses from the device’s DHCP Server. If you would like some
