LINK-MI LM-EP36, Operating Instruction

Page: 12 / 27

12
Operating Instructions
3. Connect another HDMI display and the HDMI Receiver unit with HDMI
Cable.
4. Connect the Transmitter and Receiver with Cat5e/6 cable
5. Connect the IR TX cable into “IR TX” port of the transmitter; Connect the IR
RX cable into “IR RX” port of the receiver. Then you can control the source at
the RX side with IR.
6. Connect one RS-232 Cable from the PC or automation system to the
RS-232 port on the Transmitter; Connect one RS-232 cable from the
Receiver to the RS-232 device to be controlled.
7. Power on Transmitter and Receiver with adapter 5V 1A.
NOTE: Insert/Extract cables gently.
5.3.2 Compatible with Video Player such as VLC etc
5.3.3 Point to many
1. Setting the IP address for Transmitter & Receiver and preparing the switch
following the steps as instructed above (5.1.1&5.2)
2. Connect the source device and the Transmitter unit with HDMI Cable.