Linhai T-Boss 550, Service Manual

Page: 126 / 258

CHAPTER 3 ENGINE
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE PAGE. 3- 101
3.5.
FUEL INJECTION SYSTEM
3.5.1 ECU
3.5.1.1 Description & Working Principle
3.5.1.2 Appearance
3.5.1.3 Handling
– Don’ts & Do’s
3.5.1.4 Installation requirements
3.5.1.5 Power Requirements
3.5.1.6 Temperature Requirements
3.5.1.7 Maintenance service and Repair
3.5.2 INJECTOR
3.5.2.1 Appearance
3.5.2.2 Temperature Requirements :
3.5.2.3 Fuel Contamination
3.5.2.4 Injector Installation
3.5.2.5
Replacement Techniques
3.5.2.6 Interchange ability
3.5.2.7 Cleaning Procedure
3.5.3 Throttle Body Assembly
3.5.3.1 Description and Working Principle
3.5.3.2 Appearance
3.5.3.3 Throttle Body Removal
3.5.3.4 Cleaning Procedure
3.5.3.5 Throttle Body Installation
3.5.4 Engine Coolant Temperature Sensor
3.5.4.1 Description and Working Principle
3.5.4.2 Appearance
3.5.4.3 Installation Requirements
3.5.4.4 Sample Cleaning
3.5.5 Intake AirPressure and Temperature Sensor(MAP&MAT)
3.5.5.1 Description and Working Principle
3.5.5.2 Appearance
3.5.5.3 Operating Environment
3.5.5.4 Sample Cleaning
3.5.6 Oxygen Sensor
3.5.6.1 Description and Working Principle
3.5.6.2 Appearance
3.5.6.3 Technical Parameters
3.5.6.4 Fuel Quality Requirements
3.5.7 Ignition Coil
3.5.7.1 Description and Working Principle
3.5.7.2 Appearance
3.5.7.3 Installation requirements
3.5.7.4 DOs a nd DONTs