Linhai T-Boss 550, Service Manual

Page: 122 / 258

CHAPTER 3 ENGINE
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE PAGE. 3- 97
Install crankshaft C-ring
①
Install lock washer so that it covers the locating pin;
Apply thread locker to the bolts before installing, and
tighten them to the specified torque;
Sprocket bolt tightening torque: 15 N·m
Bend up the lock washer to lock the bolts.
Cylinder Head Cover
Clean the mating surface of cylinder head and
cylinder head cover;
Install dowel pin to the cylinder head
Apply sealant to the mating surface of the cylinder
head cover;
Install cylinder head cover bolts, tighten diagonally
to the specified torque.
Cylinder head cover bolt tightening torque: 10 N·m
Note: When tightening the cylinder head cover bolts,
the piston must be at top dead center on the
compression stroke.