Linhai T-Boss 550, Service Manual

Page: 121 / 258

CHAPTER 3 ENGINE
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE PAGE. 3- 96
Install chain tensioner;
Camshaft
Align mark “A” on magneto rotor with mark “B” on
crankcase;
Note: while rotating crankshaft, pull the cam chain
upward, or the chain will be caught between
sprocket and crankcase.
Align the mark “A” on the camshaft so that they are
parallel with the mating surface of the cylinder head.
Note: Do not rotate the magneto rotor while doing this.
when the sprocket is not positioned correctly, turn
the sprocket;
Engage the chain on the sprocket with the locating
pin “B” as illustrated on the right;
Recheck if the position of mark “A” and “C” is correct.
If not, reassemble until it is correct.