Linhai M565L T3b, Owner'S/Operator'S Manual

Page: 46 / 105

M565L T3b OWNER’S/OPERATOR’S MANUAL
9. BREAK-IN PERIOD
9-1
CAUTION
The break-in period for your new ATV is the first 50 hours of operation.
No other action on your part is as important as a proper break-in period.
Careful treatment of new engine will result in more efficient performance and
longer life for the engine. Perform the following procedures carefully.
Do not operate at full throttle or high speeds for extended periods during the
break-in period. Excessive heat can build up and cause damage to close fitted
1. Fill the fuel tank.
2. Check oil reservoir level indicated on dipstick. Add oil if necessary.
3. Drive slowly at first. Select an area which is open and will give you room to
familiarize yourself with vehicle operation and handling.
4. Vary the throttle positions. Do not operate at sustained idle.
5. Perform regular checks of fluid levels, controls and all important areas on
the vehicle as outlined earlier on the daily pre-ride inspection checklist
found in
‖4.Daily pre-ride inspection‖.
6.
Don’t pull loads.
7. Break in oil and filter. Change at 20 hours or 800km.
engine parts.
Please set a limit to
half throttle during
the break-in period.
1. Locknut 2. Adjuster