manualshive.com logo in svg

LINET D9U001F10-0101, Instructions For Use And Technical Description, Page: 40 / 46

Share
Download
LINET D9U001F10-0101 Instructions For Use And Technical Description Download Page 40

                 

D9U001F10-0101_06

40

17 Cleaning/Disinfection

WARNING!

Risk of injury when working on the bed!

► 

Pay extra attention when cleaning any movable or controlling mechanisms of the bed to prevent invol-untary  

 

 

activation, entrapping or crushing.

► 

Cleaning should be entrusted to the person who has been trained to control the bed.

WARNING!

Risk of damaging the bed due to use of incorrect cleaning detergents or cleaning processes!

► 

The bed is not designed for machine washing.

► 

The bed is not designed for cleaning by spraying, showering nor for pressure or steam cleaners.

► 

The selection of cleaning detergents/disinfections and their correct concentration is responsibility of responsible  

 

 

person in charge of cleaning/disinfection in accordance with the informations provided in the instructions for use.

► 

Never use germicidal or other radiants for disinfection of the bed, if those radiants act directly on the bed.

► 

Follow these instructions and follow the prescribed dosage by the manufacturer of cleaning detergents.

 

► 

Not following recommended processes may result in damaging or deterioration of the bed condition.

► 

Check if used cleaning agents and disinfectants are compatible with materials that the product consists 

of! For information see the following table.

BED COMPONENTS THAT ARE 

INTENDED TO BE CLEANED

Do not clean what is not mentioned 

in this column!

MATERIALS (SURFACES OF THE MENTIONED BED COMPONENTS)

Competent user is responsible for check if used cleaning agents and disinfectants 

are compatible with mentioned materials!

Head board and foot board

Polypropylene (PP)

Head siderails and foot siderails

Polypropylene (PP)

Decors (head board, foot board, head 

siderails, foot siderails)

Acrylonitrile butadiene styrene (ABS)

Single Collapsible Siderails (3/4 

siderails)

Lacquered steel (Fe) + Polyamide (PA)

Mattress support platform covers 

(Backrest)

Acrylonitrile butadiene styrene (ABS) + Lacquered steel (Fe)

Mattress support platform covers 

(Thighrest, Calfrest)

Acrylonitrile butadiene styrene (ABS) + Lacquered steel (Fe)

Seat section

Lacquered steel (Fe)

Castors

ZnCr-coated steel (Fe)

Castor control levers

Polyamide (PA)

Frame of the mattress support plat-

form

Lacquered steel (Fe)

Undercarriage

Lacquered steel (Fe)

Corner bumpers

Polypropylene (PP)

Labels

siliconized paper with lamination or with resin

Accessory rail

Lacquered steel (Fe) + Polyethylene (PE)

Control levers

Acrylonitrile butadiene styrene (ABS)

Summary of Contents for D9U001F10-0101















































Reviews:

No comments