D9U001F10-0101_06
17
7 Use and storage Conditions
The bed may not be used and stored in indoor environments:
■
Where there is a risk of explosion.
■
Containing inflammable anaesthetics.
The bed is designed for use in rooms for medical purposes. Electrical installations must therefore meet local standards laying down
the necessary conditions for electrical installations.
► Disconnect the bed from the mains in exceptional cases (i.e. earthquake, lightning).
8 Scope of Delivery and Bed Variants
8.1 Scope of Delivery
Delivery:
■
The bed is delivered with dismounted head board and foot board, head bar and undercarriage. It is necessary to mount
those parts to bed (according the chapter Assembly of Disassembled Bed). Upon receipt check that the shipment is complete as
specified on the delivery note. Notify the carrier and supplier of any deficiencies or damages immediately as well as in writing or
make a note on the delivery note.
8.2 Bed Variants
Features – Praktika 1 1F (model number is located on the serial label)
s = standard
o = optional
■
Mattress support platform
□
Mattress support platform consisting of steel parts (s)
□
Mattress support platform consisting of removable plastic parts (o)
■
Siderails
□
Without siderails (s)
□
Split plastic siderails (o)
□
Single collapsible siderails (o)
■
Head board and Foot board
□
Removeable head board and foot board with coloured inserts (s)
■
Castors
□
125 mm Tente Motion with individual brake (s)
□
125 mm Tente Motion with single axle brake (o)
■
Control Elements
□
Controlling levers for back / foot rest setttings (s)
■
Other
□
One pair of universal accessory holder (o)
□
Segufix holders (o)
□
Protector® (o)
□
Extender® (o)
□
Lifting pole holder (s) (head end)
□
Accessory holder (o) (foot end)
■
Powder Coating Colours
□
Powder coated steel parts – RAL 9002 (white) (s)
□
Powder coated steel parts – RAL 9006 (grey) (o)