-15-
To input the baud rate manually,
touch the current baud rate. On
the right side of inputted baud
rate, the actual baud rate and
tolerance are displayed.
The actual baud rate is the closest baud rate which the circuit is able to
measure. If the tolerance is high, the analyzer may not able to monitor
accurately.
■
Sample point
Set the bit sample point between 60%
～
90%. On the right side of
inputted sample point, the actual sample point is displayed
For CAN FD, set“ Sample point
(data)” as well.
■
CRC type
For CA N FD, select “ISO
CRC”or “non-ISO CRC”.
■
ID filter
Mark on the box of“ ID filter”
and touch [ID setting]. Set the
ID in binary or with“ don’ t
care” in [X].
＜
For LIN
＞
■
Speed
Touch […] to select the preset
s p e e d o r i n p u t b a u d r a t e
manually.
■
ID filter
Mark on the box of“ ID filter” and touch [ID setting]. Set the ID in binary
or with“ don’ t care” in [X].
