36
13.
Function / reference
Description of each function of the menu
Menu item
Toolbar
Shortcut key
Function
New
Ctrl+N
Open a new log window.
Open...
Ctrl+O
Open a saved file.
Close
Close a log window. If the log data needs to
be saved to a file, the save dialog appears.
Save
Ctrl+S
Save the log data under the current file
name. If the file has no name, the save
dialog appears.
Save as...
Save the log data under a new name.
Export
Ctrl+E
Save in,Text format
・
CSV format
・
DATA
packet:binary format or any format
*1
.
Print...
Ctrl+P
Print out the log data.
Can print out only the selected area of
the log data.
Print Preview
Shows the print preview page.
Print Setup...
Set up the printer.
Exit
Alt+F4
Exit the USB protocol analyzer software.
Undo
Ctrl+Z
Undo the last paste.
Copy
Ctrl+C
Copy the log data selected in the log
window to clipboard in the text format.
Paste
Ctrl+V
Paste some of the log data copied to
clipboard at the end of the active log
window.
Select all
Ctrl+A
Select all transactions displayed.
Invert selection
Ctrl+I
Invert the selected and non-selected
transactions.
*1
Save as export. Exported data cannot be loaded into the USB protocol analyzer software again.
Text format
When selecting "Text format", it will save the data in almost same format as displayed data.
CSV format When selecting "CSV format", it will save the data in following format.
File type
Detail
CSV(with comma:with trigger output)
（
*.CSV
）
Save data with trigger occurrence
information
CSV(with comma)
（
*CSV)
without trigger occurrence information
DATA packet:
binary format
When selecting "Binary format", it will save only DATA packet in binary format. Set the
address/endpoint and save the data.
To save data in the existing file, select "Add to existing file".
To save data after removing some data on the top/end, input the number of bytes to remove.
* All above format will be saved either from "whole log data" or "only selected data".
Notice
：
Exported data cannot be loaded into the USB protocol analyzer software again.
