20
AE1000Plus Operation
Requesting Access with an Entry Code
•
Residents have up to 40 seconds to key in their entry code.
•
Up to eight seconds are allowed between each keystroke.
•
All digits of the entry code must be entered. Example: If the entry
code length is set for four digits, and the code is 0042, the user
must enter “0 0 4 2”.
•
If the wrong key is pressed, pressing the
key will reset the
keypad. The correct code can then be entered.
•
After a correct code is entered, and if the conditions for granting
access are fulfi lled, the programmed relay will activate for the
programmed time.
•
If the number of incorrect codes entered exceeds the keypad
lockout count, the keypad will be locked and not accept any entries
for one minute.
•
If the Anti-passback feature is enabled, the entry code will be
unusable until the anti-passback time expires.
Requesting Access with a Wireless Transmitter
•
Activate a wireless transmitter within radio range of the
AE1000Plus antenna.
•
After a valid transmitter is decoded, and if the conditions for
granting access are fulfi lled, the programmed relay channel will
activate for the programmed time.
•
If the Anti-passback feature is enabled, the transmitter will be
unusable until the anti-passback time expires.
Requesting Access with a Visitor Call
•
Press to view the directory.
•
The visitor scrolls through the alphabetical directory entries
viewing the resident names and associated directory numbers
by pressing
& on the keypad. (Holding down the keys will
scroll the display faster.)
•
If the visitor already knows the resident’s directory number, they
can enter the directory number to call the resident.
•
The system dials the resident’s telephone number to establish
2-way communications.
✦
NOTE
:
The resident’s telephone number will never be displayed to
the visitor.
•
If the resident is using the telephone at the same time a visitor
calls, the display will indicate to the visitor that the line is busy.
•
The resident answers the call and converses with the visitor to
determine if access will be granted.
•
The resident can use their telephone’s keypad to grant access
activating Relay Channel “A” by pressing , or activating Relay
Channel “B” by pressing
. After access is granted, the system
will disconnect the visitor and resident call.
•
The resident can disconnect the visitor without granting access by
pressing
or by hanging up.
✦
NOTE
:
The telephone keys that the resident presses can be
customized for the installation.
•
The length of time the visitor is allowed to talk can be programmed
from 15-255 seconds. The resident will hear a series of beeps
during the last 10 seconds of talk time. To restart the talk timer, the
resident can press on their telephone.
ENT
R
Y CODE AT
R
EMOTE KEYPAD
ENT
R
Y CODE AT LOCAL KEYPAD
ACTIVATE T
R
AN
S
MITTE
R
ANTENNA
ENTE
R
DI
R
ECTO
R
Y NUM
B
E
R
O
R
P
R
E
SS
O
R
S
C
R
OLL TH
R
OU
G
H THE
R
E
S
IDENT
NAME
S
2
TO
P
R
E
SS
TO VIEW DI
R
ECTO
R
Y
1
3
AFTE
R
S
C
R
OLLIN
G
, ENTE
R
THE
R
E
S
IDENT'
S
DI
R
ECTO
R
Y NUM
B
E
R
AND TALK
WITH THE
R
E
S
IDENT
THE
R
E
S
IDENT CAN CONT
R
OL
ACCE
SS
U
S
IN
G
TELEPHONE KEY
S
R
ELAY "A"
R
ELAY "
B
"
DI
S
CONNECT
VISITOR
TENANT
