QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 914
MAIN/CAM LED CONTROLLER
LTC3210
2
Figure 1. Proper Measurement Equipment Setup for DC914
USING THE LTC3210 QUICKEVAL SOFTWARE
The program provides brightness controls for
the MAIN and CAM LEDs. The
UPDATE
but-
ton updates the PIC controller and the LED
displays to the current settings on the
LTC3210 demo control window. The
FLASH
button flashes the CAM LED from the ENCT
(Torch) setting to the ENCF (Flash) setting for
the time selected in the FLASH TIME drop-
down window. The
FLASH TIME
drop-down
window allows the user to select the flash time
from 50ms to 1000ms in various increments.
The
GRADATION Cycle
button briefly illus-
trates how the LTC3210 may increment and
decrement the displays. The
LEDS OFF
but-
ton resets all LEDs to zero, and stops the
gradation cycle.
VIEW LTC3210 PRODUCT PAGE Button –
This button opens an internet browser and
searches the Linear Technology Corporation
web site for information on the LTC3210 when
an internet connection is available.
ENM Control –
This vertical slide control ad-
justs the MAIN display from 0 to 20mA in 8
