![Linear Acoustic LQ-1000 User Manual Download Page 13](http://html1.mh-extra.com/html/linear-acoustic/lq-1000/lq-1000_user-manual_1922082013.webp)
Linear Acoustic LQ-1000 User Guide
9
Chapter 2: Connections and Quick Setup
This chapter covers all required connections for the LQ-1000.
2.1
Unpacking and Inspection
Before unpacking the unit, inspect the outer carton for shipping damage. If the carton
shows damage, inspect the unit in those areas. Please save the carefully designed shipping
carton and packing materials. In the unlikely event that the unit needs to be returned to the
factory, alternate cartons or packing materials may not be adequate and can cause damage
not covered by warranty.
The following essential items are provided with the unit:
•
Bag containing:
•
One or two IEC power cords (style matches country of order);
•
USB Thumb Drive for software updates
•
this manual, and a small piece of SWAG
•
Warranty information: Please fill out and return the warranty card to Linear Acoustic
to ensure your software and documentation are kept up to date.
2.2
Installation
LQ-1000 installation requires:
•
two standard rack space units with ADEQUATE VENTILATION (the unit vents
from the front side slots;
•
standard 75-Ohm BNC cables for digital signal connections;
To connect to digital equipment with 110-Ohm XLR connectors, use impedance-
matching transformers (available from Canare, Neutrik and other manufacturers).
•
Proper selection of reference. The unit will default to internal 48kHz, but for proper
timing should be set to AES 1, AES Ref or SDI (AES Ref is only available on the LQ-
1000 Plus and units shipped since February, 2011).
Summary of Contents for LQ-1000
