38
DO1051K
EN
VACATION TIME
For short vacation periods, leave the control knobs at their usual settings. During longer absences:
· Remove all foods.
· Disconnect from electrical outlet.
· Clean the refrigerator thoroughly, including defrost pan.
· Leave door open to avoid possible formations of condensate, mold or odors.
POWER FAILURE
Most power failures are corrected within an hour or two and will not affect your refrigerator temperatures.
However, you should minimize the number of door openings while the power is off. During power failures
of longer duration, take steps to protect your food by blacking dry ice on top of packages.
Move the appliance
Disconnected the power plug, Remove or securely fasten down all loose items inside the refrigerator, To
avoid damaging the leveling legs, turn them all the way into the base.
SOME IMPORTANT RULES FOR THE CORRECT USE OF THE REFRIGERATOR
· Never place hot foods in the refrigerator.
· Beverages should be stored in sealed containers.
· Foods to be stored for a long time should be wrapped in cellophance or polyethylence, or kept in glass
containers.
· Never place spoiled foods in the cabinet.
· Don’t overload the cabinet.
· Don’t open the door unless necessary.
· Caution: please keep the products away from the fire or similar glowing substance before you dispose
the refrigerator.
· Caution : Not for outer camping use (ex. Tent)
· Caution: For indoor use only.
· Caution: The appliance can not be used in public transportation.
DOOR CONVERSION
If you need to hinge your door on the opposite side it is recommended that you call your local authorised
service agent to make this conversion or ask a technician.
Before you reverse the door, you should ensure the appliance is unplugged and empty. It is recommended
to use a crosshead screwdriver and a spanner (both not supplied).
1.
Remove the screws on the back of the top cover.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
