25
OSD - SYSTEM - SECURITY
ON SCREEN DISPLAY
Security level 8 (most limited level) allows you to work only on preselected channel (computer) in a predefined
display mode (Quad / Full / PiP). Except the security menu, where you can change the security level there are
no other operations available.
Same as security level 8. All OSD windows are available that have information contents only (showing display
modes, active channels and settings):
CONSOLE
Video Output / EDID
VIDEO
Video Input
COMPUTER
Keyboard / Mouse
HELP
Command / About / Contact
Same as security level 7. Additionally available are:
- Active channel setting using front panel buttons, keyboard or mouse commands
- Channel selection in Quad Mode using front panel PiP button
Same as security level 6. Additionally available are:
- Display mode setting (Quad / Full / PiP) using front panel buttons, keyboard or mouse commands
SYSTEM
Test Pattern
SECURITY LEVEL 8
SECURITY LEVEL 7
SECURITY LEVEL 6
SECURITY LEVEL 5
Quad View Switch - Installation and Operation Manual
Note:
Before you set a security level especially to a higher level (6, 7 or 8) it is important to save your start
screen with START command (see page 32) in order to restart with this screen by resetting or powering
up device.
