LINDY CPU Switch Multiscreen Installation and Use
Page 33
4. LINDY CPU Switch Multiscreen configuration
options
All the options described in this section are entered in LINDY CPU Switch
Multiscreen configure mode - see section 2.6 for instructions on entering configure
mode.
4.1 Screen saver time delay
LINDY CPU Switch Multiscreen contains a programmable screen saver which will
blank the display after the set time delay with no keyboard or mouse activity. Simply
typing at the keyboard or moving the mouse will re-enable the display. The display
will flash whilst the LINDY CPU Switch Multiscreen is in screen save mode.
B1 - screen saver disabled (default)
B2 - Blank screen after 1 minute of inactivity
B3 - Blank screen after 2 minutes of inactivity
B4 - Blank screen after 4 minutes of inactivity
B5 - Blank screen after 8 minutes of inactivity
B6 - Blank screen after 12 minutes of inactivity
B7 - Blank screen after 16 minutes of inactivity
B8 - Blank screen after 20 minutes of inactivity
4.2 Autoscan ‘lock on’ mode and delay time
LINDY CPU Switch Multiscreen can be set to select each channel in turn for a
period of time set by the autoscan delay time. Autoscan mode is entered by typing
the hotkey keys together with ‘A’. By default, only those channels which have a
powered up computer connected to them will be scanned. Sometimes it may be
desirable to scan all channels, even if the attached computer is switched off (this will
simply show a blank screen when it is selected). All the LINDY CPU Switch
Multiscreen’s ports will be scanned if option L2 is selected. Some applications may
also require the LINDY CPU Switch Multiscreen to power on in autoscan mode. This
feature can be selected using the L3 or L4 options.
