LINDY CPU Switch Multiscreen Installation and Use
Page 20
PC originally booted.
Type of mouse / system Driver type
Likely expected
Suggested
Connected at bootup
data format
restoration
PS/2
PS/2
only
PS/2
F5
PS/2
IntelliMouse PS/2
F5
IntelliMouse/CPU
Switch
PS/2
only
PS/2
F5
IntelliMouse/CPU Switch
IntelliMouse
IntelliMouse
F6
To restore lost mouse movement on a CPU connected to the LINDY CPU Switch
Multiscreen:
1) Select the CPU that has lost its mouse movement
2) Press the select key on the front of the LINDY CPU Switch Multiscreen for 5
seconds until ‘C’ is displayed. You are now in configure mode.
3) To restore a PS/2 mouse connection press
) I
Or, to restore an IntelliMouse connection press
) I
4) Exit from configure mode by typing
(I
5) Test the mouse movement by moving the mouse a short distance.
F5 - Restore PS/2 mouse function
F6 - Restore IntelliMouse function
2.12 Upgrading the CPU Switch’s flash memory
The LINDY CPU Switch Multiscreen uses flash memory technology which enables
the firmware code to be upgraded by the user. Upgrades are performed by
connecting a PC's serial port to the LINDY's options port and running an upgrade
program on the PC. This upgrade program downloads the new firmware to the
LINDY CPU Switch Multiscreen and checks that the data has been programmed
correctly.
