User Manual
English
Please ensure the desired output ports are ticked.
To configure automatic switching
Switch Frequency
: The default is 2000milliseconds
Send all outputs combined:
All outputs will be un-ticked by default
Un-ticked
– Switch all ports one by one
Ticked
– Switch all output & the desired input ports at the same time
Please note: If many input ports are selected, this will switch inputs one by one
Wait until others have finished then start next loop
: This can be selected when
“Send all outputs
combined
” is ticked
Un-ticked
- When the number of the selected input ports is not the same as selected output ports, the
next loop will automatically start once the final output has finished.
Ticked
– All outputs will start a new loop at the same time. When the number of the selected input ports
is not the same as selected output ports, the next loop will automatically start once the final output has
finished.
Stop CMD after one loop
: Automatically stops switching once one loop is finished
Select all outputs: Quickly tick/un-tick all output ports
Select Start to begin the automatic switching loop
While in progress, select Stop to instantly stop the loop.
Summary of Contents for 38260
Page 2: ......
