26
18.
Environmental protection:
This product must not be disposed of in communal waste.
Electrical waste in the Czech Republic is disposed of within the Rema System.
In countries other than the Czech Republic, waste sorting is subject to local
regulations.
Sorted waste enables recycling and reusing used products and packaging materials. Reuse of
recycled material helps protect the environment from pollution and reduces resource
consumption. Local regulations may regulate the method of disposing household appliances at
local collection points or at the point of sale.
19.
Maintenance:
Flush the beverage tubing of the cooler after each use with pressurised water (see
Sanitation by Water). To make flushing easier, use a sanitation adapter according to
your type of keg coupler (not included in standard accessories). The cooler must be
sanitised once every 14 days by a person with chemical engineering qualifications.
The condenser must be checked for cleanliness every month. Any dirt found must be
cleaned with compressed air or wiped off. Otherwise, there is a risk of reduced cooling
output or damaging of the cooler.
20.
Inspection before every use:
1.
Visual check.
2.
Water level check.
3.
Lead-in cable check.
4.
Condenser cleanliness check (in case of excess pollution of the
condenser, clean more frequently than once a month).
Warning
:
Do not use the device if defects or malfunctions are found.
Summary of Contents for Green Line AS-110-US
