4
1. INTRODUCTION:
Thank you for purchasing this LINDR product.
2. DESCRIPTION OF THE DEVICE:
Soda Water Makers:
Soda Water Makers are the professional devi-
ces designed for producing chilled soda water
by mixing H
2
O and CO
2
.
These practical devices can be used in house-
holds, offices, restaurants, production facilities
and more.
This manual is intended for models:
SODA PYGMY GREEN LINE
SODA PYGMY 25 GREEN LINE
SODA AS-45 GREEN LINE
SODA AS-110 GREEN LINE
EXTERNAL SODA WATER MAKER
3. MACHINE PLATE:
4. GENERAL INSTRUCTIONS, MEASU-
RES AND SAFETY INSTRUCTIONS:
When using the device, follow basic safety
instructions stated by the manufacturer. Any
other use is considered impermissible and
therefore dangerous. The supplier is not liable
for damage caused by incorrect use.
DO NOT USE THE DEVICE FOR PURPOSES
OTHER THAN THOSE STATED BY THE MANU-
FACTURER!
General safety principles. Observe the fo-
llowing safety instructions.
The supplier is not liable for damage caused
by activities carried out on this device without
observing the following instructions!
WARNING:
Children aged 15 or more and
persons with reduced physical, sensory or
mental capabilities or insufficient experien-
ce and knowledge may only use the device
when supervised or instructed in safe use of
the appliance and familiarised with potential
dangers.
WARNING:
Children must not be allowed
to play with the appliance. Store all packaging
material out of reach of children (comes with a
plastic bag – suffocation hazard).
WARNING:
Cleaning and maintenance of
the appliance on the part of the user must not
be done by unsupervised children.
WARNING:
Before connecting to main
electrical supply, check that the voltage and
frequency in the mains corresponds to the
data stated on the device.
WARNING:
Always make sure that the soc-
ket you intend to plug the cooler into meets
the specifications on the machine plate (volt-
age, frequency, input power).
WARNING:
Before performing operations
on the device such as cleaning or maintenan-
ce, ALWAYS disconnect the device from power
supply: set the thermostat to „O“ position and
unplug the appliance from the socket.
