Page Number - 13
FlowMaster™ Rotary Driven Electric Pump
Maintenance and Repair
Form 402753
35. Remove crankkrod and eccentric assembly (Items 1-7).
33. Press out wrist pin bushing (Item 12) with 5/16-24 bolt
(from 276275 kit), needed since pivot bushings often stick in
wrist pin anchor (Item 13a).
34. Remove wrist pin bushing (Item 12).
32. View of wrist pin bushing (Item 12).
31. Remove wrist pin bushing screws (Item 11). (Reassembly
torque: 100-110 in. lbs. (11.3 - 12.4 Nm).) Reassembly recom-
mendations: use Loctite 242 or equivalent on screw threads).
36. Loosen wrist pin anchor (Item 13a). (Reassembly torque:
20 - 25 Ft. Lbs. (27.1 - 33.9 Nm).)
37. Remove wrist pin anchor (Item 13a). (Reassemblly recom-
mendations: replace O-ring seal (Item 13b), be sure threads on
wrist pin anchor (Item 13a) are clean and free of all oil or other
ÀXLGV
38. View of plunger tube and plunger tube bushing assembly
(Items 10, 10a, 10b, 10c and 10d).
