Page Number - 10
FlowMaster™ Rotary Driven Electric Pump
Maintenance and Repair
Form 402753
16. Remove clip.
17. Using 2 1/2” dia. steel pipe included in the special tool kit
(276275), support the front housing seal and bearing as shown.
18. Support crankrod as shown with a stack of washers or other
spacer of the proper thickness.
19. Drive out the pump shaft
(Item 37) using nylon rod
included in special tool kit
(276275).
20. Pump shaft will drop inside the support pipe when it clears
the pump assembly.
21. Loosen outlet pin nuts (Item 32). (Reassembly torque:
30-35 Ft. Lbs. (40.7 - 47.5 Nm).)
22. Remove outlet nuts (item 32) from both sides of pump.
(Reassembly recommendation: use Loctite 242 or equivalent
on outlet nut threads.
