110 Volt AC Power Point (If Equipped)
WARNING:
Do not keep electrical devices plugged in the
power point whenever the device is not in use. Do not use any
extension cord with the 110 volt AC power point, since it will defeat
the safety protection design. Doing so my cause the power point to
overload due to powering multiple devices that can reach beyond the
150 watt load limit and could result in fire or serious injury.
Note:
The cap should always be closed whenever the power point outlet
is not in use.
Note:
Keep the engine running to use the power point.
The 110 volt AC power point outlet is used for powering electrical
devices that require up to 150 watts. Exceeding the 150 watt limit will
cause the power point to cut off the power temporarily to provide
overload protection.
The power point is located on the
back of the center console (inside
the second row center console
on vehicles equipped with that
feature).
The power point is not designed for the following electric appliances;
they may not work properly:
•
Cathode ray tube type televisions
•
Motor loads, such as vacuum cleaners, electric saws and other electric
power tools, compressor-driven refrigerators, etc.
•
Measuring devices, which process precise data, such as medical
equipment, measuring equipment, etc.
•
Other appliances requiring an extremely stable power supply:
microcomputer-controlled electric blankets, touch sensor lamps, etc.
170
Auxiliary Power Points
2014 MKT
(mkt)
Owners Guide gf, 2nd Printing, December 2013
USA
(fus)
