E.
Cooled seat control (if equipped):
Press to switch the cooled
seats off and on. See
Heated and cooled seats
in the
Seats
chapter for
more information.
F.
AUTO:
Press to activate automatic control of the airflow direction in
the rear of the vehicle. The system automatically determines the airflow
distribution in order to reach and maintain the desired temperature.
G.
REAR LOCK:
Illuminates when the rear climate system is being
controlled by the front controls. The rear climate controls do not work
when this is illuminated.
GENERAL OPERATING TIPS
•
To reduce fog build-up on the windshield during humid weather,
select defrost. Temperature and fan speed can also be increased to
improve clearing.
•
To reduce humidity build-up inside the vehicle, do not drive with the
system off or with recirculated air engaged.
•
Do not put objects under the front seats that will interfere with the
airflow to the back seats.
•
Remove any snow, ice or leaves from the air intake area at the base
of the windshield.
•
To improve the air conditioning cool down, drive with the windows
slightly open for 2-3 minutes after start-up or until the vehicle has
been aired out.
•
A small amount of air may be felt from the floor vent regardless of
the air distribution setting that is selected.
During extreme high ambient temperatures when idling stationary for
extended periods of time in gear, it is recommended to run the air
conditioning in the MAX A/C mode, adjust the blower fan speed to the
lowest setting and put the vehicle’s transmission into position
P
to
continue to receive cool air from your air conditioning system.
For maximum cooling performance in AUTO, press
MAX A/C.
For maximum cooling performance in manual override control (using the
MyLincoln Touch climate controls):
1. Choose panel, A/C, and recirculation controls.
2. Set the temperature to LO.
3. Set the fan to the highest blower setting.
140
Climate Control
2014 MKT
(mkt)
Owners Guide gf, 2nd Printing, December 2013
USA
(fus)
