The high beams will switch off if:
•
An approaching vehicle’s headlights or a preceding vehicle’s tail lamps
are detected.
•
The vehicle speed falls below 19 mph (30 km/h).
•
The ambient light level is high enough that high beams are not
needed.
•
Severe rain, snow or fog is detected.
•
The camera is blocked.
Activating the system
Switch the system on within the information display. See
Information
displays
.
Turn the lighting control to the
autolamps position.
Manually overriding the system
When the automatic control has
activated high beams, pushing or
pulling the stalk will provide a
temporary override to low beam.
To permanently deactivate the system use the information display menu
or turn the lighting control switch from autolamps to headlamps.
A
102
Lighting
2014 MKT
(mkt)
Owners Guide gf, 2nd Printing, December 2013
USA
(fus)
