The AdvanceTrac
威
with RSC
威
system automatically enables each time the
engine is started. All features of the AdvanceTrac
威
with RSC
威
system
(TCS, ESC, and RSC
威
are active and monitor the vehicle from start-up).
However, the system will only intervene if the driving situation requires it.
The AdvanceTrac
威
with RSC
威
system includes a traction control
off button located on the center of
the instrument panel. The button
could look like either of the two
graphics shown.
The stability control light and the stability control off light in the
instrument cluster will illuminate temporarily during start-up as part of a
normal system self-check. The stability control light may illuminate
(flash) during certain driving situations which cause the AdvanceTrac
威
with RSC
威
system to operate. If the stability control light illuminates
steadily, have the system serviced by an authorized dealer immediately.
The message center will also indicate a failure with the AdvanceTrac
威
with RSC
威
system.
Note:
If the system cannot be turned off, refer to
MyKey
威
in the
Locks
and Security
chapter for more information.
When AdvanceTrac
威
with RSC
威
performs a normal system self-check,
some drivers may notice a slight movement of the brake, and/or a
rumble, grunting, or grinding noise after startup and when driving off.
When an event occurs that activates AdvanceTrac
威
with RSC
威
you may
experience the following:
•
A slight deceleration of the vehicle
•
The stability control light will flash.
•
If your foot is on the brake pedal, a vibration in the pedal.
•
If the driving condition is severe and your foot is not on the brake, the
brake pedal may move as the systems applies higher brake forces. You
may also hear a whoosh of air from under the instrument panel during
this severe condition.
•
The brake pedal may feel stiffer than usual.
Driving
279
2012 MKT
(mkt)
Owners Guide, 1st Printing
USA
(fus)
