where indicated on the left and right hand sides of the system. Refer to
Wired Headphones
following.
To install the batteries,
remove
the screw on the cover and remove
the cover. Then, gently lift the top
of the cover away from the housing
to expose the battery compartment.
When replacing the batteries, use
two new batteries (alkaline
recommended) and install them
with the correct orientation as
indicated in the battery housing.
Replace the cover and thread the
screw.
Fold-flat feature:
In addition to
headband adjustment, your new
wireless headphones will lock into
position when being used and they
can also fold-flat feature for ease of
storage. Simply rotate each earpiece
until they lock into position or fold
flat.
To operate the headphones:
•
Press POWER on the ear piece to
turn on the headphones. A red
indicator light will illuminate
indicating the headphones are
ON. Press POWER again to turn
the headphones off.
•
Adjust the headphones to
comfortably fit your head using
the headband adjustment.
•
Select the desired audio source (Channel/Monitor A or B) for each set
of wireless headphones by using the A/B selection switch on the ear
piece.
•
Adjust the volume control to the desired listening level.
Entertainment Systems
76
2012 MKT
(mkt)
Owners Guide, 1st Printing
USA
(fus)
