4. On any of the menus press RESET to highlight your choice with the
<…>.
5. Press SETUP to enter your choice. The next optional setting will be
displayed.
6. Repeat Steps 4 and 5 until you are done changing the optional
settings.
Clear MyKey
威
To reset all MyKeys
威
as admin keys, do the following:
1. Turn the vehicle on using the admin key.
2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.
3. Press and release the RESET button. HOLD RESET TO CONFIRM
CLEAR is displayed.
4. Press and hold the RESET button for two seconds until ALL MYKEYS
CLEARED is displayed.
Check MyKey
威
system status
The vehicle system check will provide the status of the following MyKey
威
parameters:
•
MYKEY MILES — This odometer only tracks mileage when a MyKey
威
is used. If mileage does not accumulate as expected, then the MyKey
威
is not being used by the intended user. The only way to reset this
odometer to zero is by clearing MyKey
威
. If this odometer is lower than
the last time you checked, then the MyKey
威
system has been recently
cleared.
•
# MYKEY(S) PROGRAMMED — Indicates how many MyKeys
威
are
programmed to the vehicle. Can be used to detect deletion of a
MyKey
威
.
•
# ADMIN KEYS PROGRAMMED — Indicates how many admin keys
are programmed to the vehicle. Can be used to detect if an additional
spare key has been programmed to the vehicle.
Refer to
Message center
in the
Instrument Cluster
chapter for MyKey
威
system warnings displays.
Locks and Security
147
2012 MKT
(mkt)
Owners Guide, 1st Printing
USA
(fus)
