manualshive.com logo in svg

Lincoln 2007 MKZ, Owner'S Manual

The Lincoln 2007 MKZ Quick Reference Manual provides users with a comprehensive guide to effortlessly navigate and understand their MKZ. This user-friendly manual is available for download, completely free of charge, from manualshive.com. Enhance your driving experience by accessing this essential resource for your Lincoln 2007 MKZ.

Share
Download
background image

For side airbag equipped vehicles, the front passenger sensing system
will turn off the passenger seat side airbag if:

•

the seat is empty and safety belt is unbuckled.

•

a child or a small person occupies the front passenger seat and the
child or small person is unbuckled.

The front passenger sensing system
uses a

⬙

passenger airbag off

⬙

or

⬙

pass airbag off

⬙

indicator which will

light and stay lit to remind you that
the front passenger frontal airbag is
off. The indicator lamp is located in
the center stack of the instrument panel above the climate controls.

Note

: The indicator lamp will illuminate for a short period of time when

the ignition is turned to the ON position to confirm it is functional.

When the front passenger seat is not occupied (empty seat) or in the
event that the front passenger frontal airbag is enabled (may inflate), the
indicator lamp will be unlit.

The front passenger sensing system is designed to disable (will not
inflate) the front passenger’s frontal airbag when a rear facing infant
seat, a forward-facing child restraint, or a booster seat is detected.

•

When the front passenger sensing system disables (will not inflate)
the front passenger frontal airbag, the indicator lamp will illuminate
and stay lit to remind you that the front passenger frontal airbag is
disabled.

•

If the child restraint has been installed and the indicator lamp is not
lit, then turn the vehicle off, remove the child restraint from the
vehicle and reinstall the restraint following the child restraint
manufacturer’s instructions.

The front passenger sensing system is designed to enable (may inflate)
the front passenger’s frontal airbag anytime the system senses that a
person of adult size is sitting properly in the front passenger seat.

•

When the front passenger sensing system enables the front passenger
frontal airbag (may inflate), the indicator lamp will be unlit and stay
unlit.

If a person of adult size is sitting in the front passenger’s seat, but the

⬙

passenger airbag off

⬙

or

⬙

pass airbag off

⬙

indicator lamp is lit, it is

possible that the person isn’t sitting properly in the seat. If this happens:

•

Turn the vehicle off and ask the person to place the seatback in the
full upright position.

2007 Zephyr

(378)

Owners Guide (post-2002-fmt)
USA

(fus)

Seating and Safety Restraints

126

Summary of Contents for 2007 MKZ

















































































































































































































































































Reviews:

No comments

Related manuals for 2007 MKZ

RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
Whispbar K561W Fitting Instructions Manual preview
K561W
Brand: Whispbar Pages: 15
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Brand: MAXWORKS Pages: 7
Waeco MagicWatch MWE250 Installation And Operating Manual preview
MagicWatch MWE250
Brand: Waeco Pages: 172
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
UAZ 2001 ???-3741 Instruction Manual preview
2001 ???-3741
Brand: UAZ Pages: 112
Car-Systems Parktronic system Volkswagen Golf MK7 Assembly Manual preview
Parktronic system Volkswagen Golf MK7
Brand: Car-Systems Pages: 10
IOGear GBHFK201W6 User Manual preview
GBHFK201W6
Brand: IOGear Pages: 38
Whispbar WB201 Manual preview
WB201
Brand: Whispbar Pages: 14
Navman N-series B2+ User Manual preview
N-series B2+
Brand: Navman Pages: 27
Mercedes-Benz viano 639 series Introduction Into Service Manual preview
viano 639 series
Brand: Mercedes-Benz Pages: 32
AEM 21-5011 Installation Manuallines preview
21-5011
Brand: AEM Pages: 5
CEMO DT-Mobil Easy 200 L Original Operating Instructions preview
DT-Mobil Easy 200 L
Brand: CEMO Pages: 80

Brands by name

Popular brands

Load more brands