manualshive.com logo in svg

Lincoln 2007 MKZ, Owner'S Manual

The Lincoln 2007 MKZ Quick Reference Manual provides users with a comprehensive guide to effortlessly navigate and understand their MKZ. This user-friendly manual is available for download, completely free of charge, from manualshive.com. Enhance your driving experience by accessing this essential resource for your Lincoln 2007 MKZ.

Share
Download
background image

N (Neutral)

With the gearshift lever in N (Neutral), the vehicle can be started and is
free to roll. Hold the brake pedal down while in this position.

D (Drive) with Overdrive

The normal driving position for the best fuel economy. Transaxle
operates in gears one through six.

D (Drive) without Overdrive

Overdrive can be deactivated by
pressing the transmission control
switch on the side of the gearshift
lever.

•

This position allows for all
forward gears (1–4) except
overdrive.

•

Provides engine braking.

•

Use when driving conditions
cause excessive shifting from O/D
to other gears. Examples: city
traffic, hilly terrain, heavy loads,
trailer towing and when engine
braking is required.

•

O/D OFF lamp in the instrument
cluster is illuminated.

•

To return to O/D (overdrive mode), press the transmission control
switch. The O/D OFF lamp in the instrument cluster will not be
illuminated.

•

O/D (overdrive) is automatically returned each time the key is turned
off.

L (Low)

Provides more engine braking when the accelerator pedal is released
than D (Drive).

If your vehicle gets stuck in mud or snow

If your vehicle gets stuck in mud or snow, it may be rocked out by
shifting between forward and reverse gears, stopping between shifts in a
steady pattern. Press lightly on the accelerator in each gear.

O/D

OFF

2007 Zephyr

(378)

Owners Guide (post-2002-fmt)
USA

(fus)

Driving

180

Summary of Contents for 2007 MKZ

















































































































































































































































































Reviews:

No comments

Related manuals for 2007 MKZ

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
Yakima K618 Instructions Manual preview
K618
Brand: Yakima Pages: 11
Wallbox Commander 2 Installation And User Manual preview
Commander 2
Brand: Wallbox Pages: 7
JANE be cool boosty Manual preview
be cool boosty
Brand: JANE Pages: 21
Chevrolet 2013 Spark Owner'S Manual preview
2013 Spark
Brand: Chevrolet Pages: 356
Ford Zephyr 2007 Owner'S Manual preview
Zephyr 2007
Brand: Ford Pages: 272
Pontiac 2004 Sunfire Owner'S Manual preview
2004 Sunfire
Brand: Pontiac Pages: 376
Jeep COMPASS 2018 Owner'S Manual preview
COMPASS 2018
Brand: Jeep Pages: 712
Quadratec Brute Strength 12057.0271 Installation Manual preview
Brute Strength 12057.0271
Brand: Quadratec Pages: 6
CITROËN C4 CACTUS Handbook preview
C4 CACTUS
Brand: CITROËN Pages: 301
Dometic Heki 2 Installation And Operating Manual preview
Heki 2
Brand: Dometic Pages: 158
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
Sears 580.32601 Owner'S Manual preview
580.32601
Brand: Sears Pages: 41
Cadillac XT4 2022 Convenience/Personalization Manual preview
XT4 2022
Brand: Cadillac Pages: 20
Linear Logic scangauge2 Quick Start Manual preview
scangauge2
Brand: Linear Logic Pages: 8
Caraudio-Systems RL-LR12-TF Manual preview
RL-LR12-TF
Brand: Caraudio-Systems Pages: 9

Brands by name

Popular brands

Load more brands