Lincoln 2007 MKZ Owner'S Manual Download Page 19

Page: 19 / 272

Treble:

Press

to adjust the treble setting.

Balance:

Press

to adjust the audio between the left and right

speakers.

Fade:

Press

to adjust the audio between the front and rear

speakers.

Speed sensitive volume:

Radio volume automatically changes slightly

with vehicle speed to compensate for road and wind noise. Use

to adjust. Recommended level is 1–3. Level 0 turns the feature off and
level 7 is the maximum setting.

Occupancy mode (if equipped):

Use

to select and optimize

sound for ALL SEATS, DRIVERS SEAT or REAR SEATS.

Compression:

Available in CD mode, this feature brings soft and loud

CD passages together for a more consistent listening level. Press MENU
until compression status is displayed. Press

to turn the feature

on/off.

Select:

These controls are used

in Menu mode to select various
settings/options.

Play/Pause/Mute:

In radio mode,

press to mute the playing media.
MUTE will appear in the display.
Press again to return to the playing media.
In CD/MP3 mode, press to pause the playing media. PAUSE will appear
in the display. Press again to return to the playing media.

SEEK

In radio or CD/MP3

mode:

Press to access the next

strong station or track.

In Satellite Radio mode (if equipped),

press SEEK

to seek to

the next channel. If a specific category is selected, (Jazz, Rock, News,
etc.), press SEEK

to seek to the next channel in the selected

category. Press and hold SEEK

to fast seek through the next

channels.

In TEXT MODE,

press SEEK

to view the additional display text

when “>” is active in the display.

In CATEGORY MODE,

press SEEK

to select a category.

2007 Zephyr

(378)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Summary of Contents for 2007 MKZ

















































































































































































































































































Search results

Summary of Contents for 2007 MKZ

Reviews:

Related manuals for 2007 MKZ

Brands by name

Popular brands

Lincoln 2007 MKZ, Owner'S Manual

Search results

Summary of Contents for 2007 MKZ

Reviews:

Related manuals for 2007 MKZ

Brands by name

Popular brands