Lincoln 1999 Town Car Owner'S Manual Download Page 169 | Manualshive

Page: 169 / 208

background image

EMISSION CONTROL SYSTEM

Your vehicle is equipped with various emission control components and a
catalytic converter which will enable your vehicle to comply with
applicable exhaust emission standards. To make sure that the catalytic
converter and other emission control components continue to work
properly:

•

Use only unleaded fuel.

•

Avoid running out of fuel.

•

Do not turn off the ignition while your vehicle is moving, especially at
high speeds.

•

Have the items listed in your Scheduled Maintenance Guide performed
according to the specified schedule.

The scheduled maintenance items listed in the Scheduled Maintenance
Guide are essential to the life and performance of your vehicle and to its
emissions system.

If other than Ford, Motorcraft or Ford-authorized parts are used for
maintenance replacements or for service of components affecting
emission control, such non-Ford parts should be equivalent to genuine
Ford Motor Company parts in performance and durability.

Do not park, idle, or drive your vehicle in dry grass or other dry
ground cover. The emission system heats up the engine

compartment and exhaust system, which can start a fire.

Illumination of the charging system warning light, “Service Engine Soon”
light or the temperature warning light, fluid leaks, strange odors, smoke
or loss of oil pressure, could indicate that the emission control system is
not working properly.

Exhaust leaks may result in entry of harmful and potentially
lethal fumes into the passenger compartment.

Do not make any unauthorized changes to your vehicle or engine. By
law, vehicle owners and anyone who manufactures, repairs, services,
sells, leases, trades vehicles, or supervises a fleet of vehicles are not
permitted to intentionally remove an emission control device or prevent
it from working. Information about your vehicle’s emission system is on
the Vehicle Emission Control Information Decal located on or near the

Maintenance and care

169

«
...
167
168
169
170
171
...
»

Summary of Contents for 1999 Town Car

















































































































































































































Reviews:

No comments

Related manuals for 1999 Town Car

Brand: Vauxhall Pages: 2

Brand: Metra Electronics Pages: 2

Brand: Edelbrock Pages: 2

Brand: SnapPad Pages: 5

Brand: Whispbar Pages: 15

Brand: Mercedes-Benz Pages: 54

Parktronic system Volkswagen Golf MK7

Brand: Car-Systems Pages: 10

Brand: Alphasonik Pages: 8

Brand: Jeep Pages: 292

Brand: TracRac Pages: 8

Brand: Lock'er Down Pages: 2

Brand: LaserLine Pages: 4

Brand: Wallbox Pages: 21

Brand: QA1 Pages: 4

Brand: Lincoln Pages: 364

Auto Security AA-9103N

Brand: Audiovox Pages: 1

Brand: APS Pages: 4

Brand: N2MB Racing Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands