Lincoln 1999 Town Car, Owner'S Manual

Page: 83 / 208

Using the power lumbar support (if equipped)
The power lumbar control is located
on the outboard side of the seat.
Press one side of the control to
adjust firmness.
Press the other side of the control
to adjust softness.
Using the manual recline function (if equipped)
Never adjust the driver’s seat or seatback when the vehicle is
moving.
Do not pile cargo higher than the seatbacks to avoid injuring
people in a collision or sudden stop.
Always drive and ride with your seatback upright and the lap
belt snug and low across the hips.
To adjust the front seatback using
the manual recliner:
•
Lift and hold the handle located
on the side of the seat.
•
Lean against the seatback to
adjust it to your desired position.
You can recline the seat back or
bring it forward.
•
Release the handle when the desired position has been reached.
Easy access/easy out feature (if equipped)
This feature automatically moves the driver’s seat backward when:
•
the transmission is in N (Neutral) or P (Park)
•
the key is removed from the ignition cylinder
The seat will move 5cm (2 inches) forward (to the original position) when:
•
the transmission is in N (Neutral) or P (Park)
•
the key is placed in the ignition cylinder
Seating and safety restraints
83