background image

LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259 • Tx 466088

Page 7 of 16

Owner Manual

1.3A-28001-B97

Subject to change without notice

Features

• available with 24 V DC and 230 V AC;
• the respective valve position is always reached , irrespective of

the voltage fluctuations, temperature and lubricant consistency;

• can easily be integrated into electrical control units due to the

electric motor-operation;

• robust and compact construction;
• insensitive to humidity and dirt;
• insensitive to mechanical influences.

Technical Data

Connection thread:

3/4" BSP

Flow rate:

Qmax = 65 dm³/h

Operating pressure:

pmax = 400 bar

Operating temperature:

-20°C to 80°C

Switching time:

0,5 sec.

Sound level:

< 70 dBA

Supply voltage:

24 V DC or 230 V AC

Power consumption

Pmax = 80 W

Degree of protection:

IP54

Weight:

24 V DC version: 11 kg

230 V AC version: 12.8 kg

fitting position:

optional

item

description

A

main line 1

B

main line 2

P

pressure line

R

relief line

Fig. 5: mounting dimensions of the EM-U2

1 0 3 7 c 9 5

Important:
The change-over valve housing is sluable by 180°

Summary of Contents for 2/2-Way

















Reviews: