Lincoln Electric WAVE DESIGNER, Operator'S Manual

Page: 21 / 74

3.2.3.2 SELECTING WORKPOINTS
Clicking on the workpoint display box in the waveform Editor window opens a Workpoint
pulldown menu. The pulldown menu displays the listing of workpoints defined for the active
waveform. Use the pulldown menu according to the following descriptions and guidelines:
• Click on any one of the listed workpoints
to access the related waveform.
• The related welding machine control
must be set to the selected parameter
value.
If the welding machine setting is
not equal to the selected workpoint
value, changes to the wave shape will
be applied to the workpoint value
nearest the welding machine setting.
• The welding machine Trim encoder must
be set to 1.00; the Arc control to “OFF”,
and the Mode control to “OFF”.
Failure
to verify these welding machine
settings will defeat all wave shaping
efforts.
Section 3 3-9
SOFTWARE OPERATION
WAVE DESIGNER
Pulse Waveform Editor
Wire Feed Speed
Ramp Up Rate
Peak Amps
Peak Time ms
Tailout Time
Tailout Speed
Ramp Overshoot %
.100
3.0
1.4
280
-7
600
Edit
Wave Designer Pro Off
700
600
500
400
300
200
100
0
0 2 4
File Tools Print Help
50
27850017
80
110
205
300
400
600
700
150