A-1
5
INSTALLATION
STAND ALONE HOOD USING THE LEG
KITS:
FIGURE – A.22
FIGURE – A.23
FIGURE – A.24
FIGURE – A.25
1.
Lift the hood, preferably using a fork-lift truck.
2.
For Large Prism
®
Exhaust Hood: use two fork-lift trucks.
3.
Drill out the embosses at corner brackets using 7/16" drill
bits.
4.
Position the legs under the corners of the hood using the
leg mounting bracket. Secure it with 3/8" bolts. See Figure
A.
22.
5.
Insert the perforated square tubing outside the bracket and
secure it with 3/8" hardware provided from both sides.
See
Figure A.23.
6.
Mount cross braces between hood and perforated tubing
on both sides.
7.
Mount the legs on to the perforated tubing adjust the
height
as required. Secure the legs with 3/8" hardware
provided.
See Figure A.24.
8.
Slowly lower the hood, until it rests on all four legs.
PRISM
®
EXHAUST HOOD