Lincoln Electric PRISM AD2458-1, Operator'S Manual, Page: 10 / 33

A-2
INSTALLATION
1) Can be mounted on the pre-existing cell wall/post.
2) Can be mounted on optional legs using the leg kits .
3) Can be hung from the ceiling using chains .
4) A combination of 2 and 3 (e.g. 2 2 legs).
This chapter describes the installation of single Prism ® Exhaust
Hood and the mounting details when two or more hoods are
attached to each other.
COMPONENTS
The Prism ® Exhaust Hood consists of the following
main components (See Figure A.1 below):
FIGURE A.2: Assembled Prism ® Exhaust Hood
TOOLS
UNPACKING
Check that the product is complete. The Prism
®
Exhaust Hood
is built up of the following components/sets:
Optionally available:
Electric drill
- socket 7 mm
- socket 10 mm
Pair of pliers to
fasten vertical
spacers
Jigsaw to make cut-
outs in Multi wall
Polycarbonate roof
panels
Glueing clamp for
mounting of legs
Razor knife for
cutting welding
strips
Fork-lift truck(s)
with long forks for
mounting of hood
XL: cargo lashing
(option)
XL: stack of pallets
(option)
• Single compartment Prism ® Exhaust Hoods consist of
one row of Multi wall Polycarbonate roof panels.
• Single compartment Prism ® exhaust hoods consist of
one row of sheet metal roof panels.
• Dual and triple hoods; when single compartment hoods
are attached to each other using connecting kits.
• Installation on the pre-existing cell wall/fence.
• Installation of hood hung from the ceiling.
• Curtain installation.
• Instructions for trimming/sizing the hood in the field.
FIGURE A.1
FIGURE A.3
A. Corner bracket
B. Connection bracket
C. Outer frame
D. Roof panel (Multi wall
Polycarbonate/sheet metal)
E. Duct collar
F. Outlet flange
G. End Plate
H. Baffle Plate
I. Outlet Roof panel
- Corner brackets
- Connection brackets
- Outer frames (available in 4.5 ft and 5.5 ft length). Number
varies based on the size of the hood.
- Roof panel (Multi wall Polycarbonate/Sheet metal)
- Outlet Roof panel with baffle kit attached
- Box with required hardware and double sided tape for Multi
wall Polycarbonate assembly.
- Instruction manual and Lincoln Electric logo for branding
- Shipment comes with pre-assembled width sections (6.5 ft or
7.5 ft)
- Leg kits with corner reinforcement braces.
- Curtain Kits (Cut to length curtains as per requirement).
- Connecting Kits (When double or triple hood need to be
mounted side by side).
- Riser/Strut kits for existing cell wall fences
- Hood hanging kit--for hanging the hood from the ceiling
- Light Kits
A
B
C
D
J
F
E
G
H
GENERAL DESCRIPTION
The Prism ® Exhaust Hood is a reliable and practical solution to
contain and extract welding, cutting, arc gouging and grinding
fume from the work environment. It is designed to connect to an
mounting options of the hood.
PRISM ® EXHAUST HOOD
WIDTH SECTION