A-
12
INSTALLATION
MOUNTING THE HOOD SIDE BY
SIDE FOR
DUAL
AND
TRIPLE HOOD
FIGURE – A.16
5. Curtain brackets are used to connect the curtains between
the two hoods. It acts as a bridge between the hoods for
curtain mounting.
6. Mount the bracket to bottom face of the hood, one on each
sides using 1/4" self drilling screws. See Figure A.17.
Curtain Bracket
FIGURE – A.15
FIGURE – A.14
Emboss
PRISM
®
EXHAUST HOOD
1.
Remove all self drilling screws from the side butting faces of
the hood. Align both hoods, make sure both hood frames are
precisely square (90 degrees). See Figure A.14.
2.
Drill out the alternate embosses from top face of both the
hoods using 3/8" drill bit.
3.
Mounting brackets to be installed alternately from either
side
as shown using M8 Bolt
and
Flange nut.
4.
Fasten hoods together using 1/4" self drilling screws on each
bracket as shown.