14
procedures using basic hand tools. Other service tasks
that are more difficult, or require special tools, are best
handled by professionals and are normally performed by
a Honda technician or other qualified mechanic.
The maintenance schedule applies to normal operating
conditions. If you operate your engine under severe
conditions, such as sustained high-load or high-
temperature operation, or use in unusually wet or dusty
conditions, consult your Honda servicing dealer for
recommendations applicable to your individual needs and
use
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any engine
repair establishment or individual, using parts that are
‘‘certified’’ to EPA standards
MAINTENANCE SAFETY
Some of the most important safety precautions follow.
However, we cannot warn you of every conceivable
hazard that can arise in performing maintenance. Only
you can decide whether or not you should perform a
given task
SAFETY PRECAUTIONS
Make sure the engine is off before you begin any
maintenance or repairs. To prevent unintentional startup,
disconnect the spark plug cap. This will eliminate several
potential hazards:
Carbon monoxide
poisoning from engine exhaust:
Operate outside, away from open windows or doors.
Burns from hot parts
:
Let the engine and exhaust system cool before touching.
Injury from moving parts:
Do not run the engine unless instructed to do so.
Read the instructions before you begin, and make sure
you have the tools and skills required. flames away from
all fuel related parts.
MAINTENANCE SCHEDULED
*
• Internal vent carburetor with dual element type
only.
• Cyclone type every 6 months or 150 hours.
**
• Replace paper element type only.
• Cyclone type every 2 years or 600 hours.
1) Service more frequently when used in dusty
areas.
2) These items should be serviced by your
servicing dealer, unless you have the proper
tools and are mechanically proficient. Refer to
the Honda shop manual for service procedures.
3) For commercial use, long hours of operation to
determine proper maintenance intervals.
4) In Europe and other countries where the
machinery directive 2006/42/EC is enforced,
this cleaning should be done by your servicing
dealer.
Failure to follow this maintenance schedule could result
in nonwarrantable failures
Improper maintenance can cause an unsafe condition.
Failure to properly follow maintenance instructions and
precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this
owner’s manual.