English 7 English
15. USB port (LF 56D only): For connecting the USB
memory and software updates.
16. Wire Spool Holder: For wire spool with maximum
16kg weight. Holder allows mounting plastic, steel
and fiber spools on the 51mm spindle.
WARNING
Be sure that wire spool case has to be completely closed
during welding.
17. Spool with wire: Not supplied as standard.
18. Wire drive: 4-rolls wire drive.
WARNING
The side panel and wire spool case have to be completely
closed during welding.
WARNING
Do not use handle to move the machine during operation.
See "Accessories" section.
LF 52D
13 14
16
17
18
Figure 4
LF 56D
13 14
16
17
18
15
Figure 5
User Interface
Wire feeder
LF 52D
is based on a standard interface (U0)
with two separate LED displays, while the
LF 56D
is
based on a 7’’ TFT display.
Standard Interface (U0)
27
26
19
25 24
19
28
21
20
23
22
30
29
Figure 6
19. Display:
Left display: Shows wire feed speed or welding
current. During welding shows the actual welding
current value.
Right display: Shows the welding voltage in volts
units or tuning value (Trim). During welding shows
the actual welding voltage value.
20. Left Knob: Adjusts values on the left display.
21. Right Knob: Adjusts values on the right display.
22. Right Button: Enables scrolling, changing and setting
welding parameters. Quick access.
23. Left Button: Enables changing the welding process
and shielding gas.
24. Thermal Overload Indicator: It indicates that the
machine is overloaded or that the cooling is not
sufficient.
25. Status Indicator: A two color light that indicates
system errors. Normal operation is steady green
light. LED light conditions and their meanings are
described in Table 1.
WARNING
The status light will flash green, and sometimes red and
green when the machine is first turned on. When the
power source is powered it can take as long as 60
seconds for the machine to be ready to weld. This is a
normal situation as the machine goes through
initialization.
