English 23 English
Lock –
it allows to set the password.
To set the password:
Access to „Configuration” menu.
Use the right knob [33] to highlight the “Lock” icon.
Figure 45
Press right knob [33]. The “Lock” setting menu is
shown on the display.
Figure 46
Turn right knob [33] to select: numbers 0-9.
Press right knob [33] to confirm first character of the
password.
Next characters should be selected in the same way.
WARNING
After setting last character system automatically exit.
Select Item to lock –
it allows to lock/unlock
some functions on welding parameters bar.
To lock functions:
Access to “Configuration” Menu.
Use right knob [33] to highlight the „Select Item to
lock“ icon.
Figure 47
Press the right knob [33]. Lock function menu is
shown on the display.
Use the right knob [33] to highlight the function (for
example “Advanced Setup”).
Figure 48
Press right knob [33]. The icon of chosen parameter
will disappeared from the lower part of the display
(Figure 49). This parameter disappeared from the
Welding parameters bar as well [41].
Figure 49
WARNING
To unlock function user have to perform the same steps
as steps to lock function.
Enable/ Disable Jobs Save
-
it allows to
switch off/on save jobs to memory
Access to „Configuration” menu.
Use right knob [33] to highlight the “Enable/Disable
Jobs” icon.
Figure 50
