Lincoln Electric K14186-1, Operator'S Manual, Page: 17 / 44

English 15 English
If user does not know the Welding Program Number, it
can be choose manually. In that case please follow below
guide:

Welding
Process

Mode change:
Synergy
/ Manual

Electrode
Wire Material

Electrode
Wire Diameter

Shielding
Gas
Support
To access the Support Menu:

Press the button [34] or right knob [33] to get access
of Welding Parameters Bar.

Use the right knob [33] to highlight the icon “Support”.

Press the right knob [33] to confirm the selection.
Figure 14
The Support Menu enables to get information of the
following points:

Technicial specification.

Accessories.

Welding materials.

Safety guides.

Welding variables effect MIG.
User setup
To access the User Setup:

Press the button [34] or right knob [33] to get access
of Welding Parameters Bar.

Use the right knob [33] to highlight the icon “User
setup”.

Press the right knob [33] to confirm the selection.
Figure 15
The User Setup Menu enables to add the additional
function and / or parameters to the Welding Parameters
Bar [41] as shown in Table 9.