English 9 English
Main Menu
Figure 4
In Main Menu, 3 selections are possible
GTAW: allow to enter in TIG Home Menu
SMAW: allow to enter in MMA Home Menu
Information: Entering in this section allow to the user
to configure various parameters of the power source.
Home Menu description
Figure 5
1. In “Primary Settings” area, the type of process and
corresponding information will be indicated like type
of arc striking for TIG and type of MMA mode (Soft,
Crisp etc …)
If “Guided Setup Mode” is selected, all inputs will be
displayed in the section.
2. “Status Bar” give additional information like Trigger
Interlock selection, remote control status.
3. “Preset Current” indicates the current value
configured by welder and, during welding, welding
current value.
4. “Voltage”: Indication of voltage welding voltage.
5. “Secondary Settings” allow to user to see the
current values of weld sequence parameters.
6. “Contextual Buttons / Encoders Labels”, informs the
user of features associated to the knob and buttons
Primary settings
Status Bar
Preset current
Voltage
Secondary settings
Contextual Buttons / Encoders Labels