manualshive.com logo in svg

Lincoln Electric FineLine BK300370, Operator'S Manual, Page: 12 / 46

Share
Download
Lincoln Electric FineLine BK300370 Operator'S Manual Download Page 12

FineLine Advanced Process Controller 

BK8053-000117 Rev B 

This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to 

non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR. 

Page 12 of 46 

2.2 System Components 

2.2.1 Standard Component s 

•

 FineLine Advanced Process Controller (APC) ............................... BK300370 

•

 FineLine Premiere Piercing Additive .............................................. BK300372 

•

 Additive Reservoir Assembly ......................................................... BK300385 

•

 Pierce Head Body .......................................................................... BK602640 

•

 Pierce Head Outer Cap ................................................................. BK602378 

•

 Pierce Head Shield Cap (300A) ..................................................... BK602376 

•

 Pierce Head Shield Cap (80A, 140A, 170A, 300A) ........................ BK602377 

•

 Pierce Head Hose .......................................................................... BK300384 

•

 Power Adapter Cable ..................................................................... BK300381 

•

 RS-485 Communication Cable ...................................................... BK300376 

•

 Ethernet Cable w/ Bayonet ............................................................. K4907-XX 

•

 Water Shield Hose ......................................................................... BK300378 

•

 Water Inlet Hose ...................................................................... BK300382-XX 

•

 Treatment Filter Housing ............................................................... BK500509 

•

 Treatment Filter Cartridge ............................................................... KP4730-1 

NOTE: -XX defines length in feet. Refer to Section 6.2 for available lengths. 

 

2.2.2 Supplied Optionally 

•

 Water Supply Hose ................................................................... BK300387-25 

•

 Air Supply Hose ....................................................................... BK200364-XX 

 

2.2.3 Supplied by OEM or End User 

•

 FineLine APC Ground Cable 

 
 
 

Summary of Contents for FineLine BK300370















































Reviews:

No comments