BK8053-000117 Rev B
FineLine Advanced Process Controller
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Page 9 of 46
1.10 Safety Standards Booklet Index
For further information concerning safety practices to be exercised with plasma arc
cutting equipment, please refer to the following publications:
•
AWS Standard AWN,
Arc Welding and Cutting Noise
, obtainable from the
American Welding Society, 550 NW LeJeune Road, Miami, FL 33126.
•
AWS Standard C5.2,
Recommended Practices for Plasma Arc Cutting
, obtainable
from the American Welding Society, 550 NW LeJeune Road, Miami, FL 33126.
•
AWS Standard FSW,
Fire Safety in Welding and Cutting
, obtainable from the
American Welding Society, 550 NW LeJeune Road, Miami, FL 33126.
•
AWS Standard F4.1, Recommended
Safe Practices for Preparation for Welding
and Cutting of Containers and Piping
, obtainable from the American Welding
Society, 550 NW LeJeune Road, Miami, FL 33126.
•
AWS Standard ULR,
Ultraviolet Reflectance of Paint
, obtainable from the
American Welding Society, 550 NW LeJeune Road, Miami, FL 33126.
•
AWS / ANSI Standard Z49.1,
Safety in Welding, Cutting, and Allied Processes,
obtainable from the American Welding Society, 550 NW LeJeune Road, Miami, FL
33126.
•
ANSI Standard Z41.1,
Standard For Men’s Safety-Toe Footwear
, obtainable from
the American National Standards Institute, 11 West 42nd Street, New York, NY
10036.
•
ANSI Standard Z49.2,
Fire Prevention in the Use of Cutting and Welding
Processes
, obtainable from the American National Standards Institute, 11 West
42nd Street, New York, NY 10036.
•
ANSI Standard Z87.1,
Safe Practices For Occupation and Educational Eye and
Face Protection,
obtainable from the American National Standards Institute, 11
West 42nd Street, New York, NY 10036.
•
ANSI Standard Z88.2,
Respiratory Protection
, obtainable from the American
National Standards Institute, 11 West 42nd Street, New York, NY 10036.
•
OSHA Standard 29CFR 1910.252,
Safety and Health Standards,
obtainable from
the U.S. Government Printing Office, Washington, D.C. 20402.
•
NFPA Standard 51,
Oxygen - Fuel Gas Systems for Welding, Cutting, and Allied
Processes
, obtainable from the National Fire Protection Association, 1
Batterymarch Park, Quincy, MA 02269.
•
NFPA Standard 51B,
Cutting and Welding Processes
, obtainable from the National
Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269.
•
NFPA Standard 70,
National Electrical Code
, obtainable from the National Fire
Protection Association, 1 Batterymarch Park, Quincy, MA 02269.
•
CGA booklet P-1,
Safe Handling of Compressed Gases in Containers
, obtainable
from the Compressed Gas Association, 1725 Jefferson Davis Highway, Suite
1004, Arlington, VA 22202.