Lincoln Electric ESSENTIAL OXYCUTTING, Safety Instruction For Use And Maintenance

Page: 22 / 42

D - MONTAGE INSTALLATION
8695 4985 / C
D-18
ESSENTIAL OXYCUTTING
The outputs are stated for one gas assembly and are to be multiplied depending on the number of gas assemblies.
GAS SUPPLY
The client should provide and install an isolating
device on each source. These devices must be
clearly identified and lockable..
The client should provide one Oxygen source
fitted with a regulator capable of delivering the
recommended flowrates and pressures.
Maximum Pressure
9 Bar
for oxygen.
Oxygen purity must be at least 99,5%.
Gas Supply at the entry to the machine
Use Nature
P in bars
+/-10%
Max. output in m³ / h
for X torches
1 2 3 4
mm
200 80 60 50
M
AC
H OX
Y Cutting Oxygen
8.2 22 23.5 23.5 26
Heating
Oxidants Oxygen
Fuel
Acetylene
1.4 0.85 0.85 1.05 1.4
Propane
1.8 0.6 0.6 1 1.3
M
AC
H HP
Cutting Oxygen
8.2 22 23.5 23.5 26
Heating
Oxidants Oxygen
Fuel
Acetylene
1.4 0.85 0.85 1.05 1.4
Propane
1.8 0.6 0.6 1 1.3
1.2 LAYOUT OF CABLES AND FLEXIBLE PIPES
The customer should provide the means for supporting and keeping away from mechanical, chemical, or thermal
damage, the cables and flexible pipes from their source to the entry of the cable support chain
There must be no fitting inside technical gutters, as gas could build up in the gutter in the event of a leak.