Lincoln Electric ESSENTIAL OXYCUTTING, Safety Instruction For Use And Maintenance

Page: 16 / 42

C - DESCRIPTION
8695 4985 / C
C-12
ESSENTIAL OXYCUTTING
3 - ESSENTIAL OXY CUTTING GAS ASSEMBLY (REF. A)
This box can power 1 to 4 torches.
You can use one gas assembly for cutting up to thickness:
- 200 mm with 1 torch
-
80 mm for 2 torches
-
60 mm for 3 torches
- 50mm for 4 torches
Beyond that, another gas assembly must be installed.
A machine may have only one gas assembly, and thus 4 torches.
The functions of the assembly are as follows:
-
Regulating the gas pressure going to the torches
- Flushing the cutting and heating oxygen line at the end of cutting/the program.
There is a specific box model for the use of acetylene.
For other fuel gases, the propane model is used.
The box is supplied wired in the machine, as in the electrical diagram. If the electrical cable is replaced, please
contact us.